Chapter 30. Debugging

The Bash shell contains no debugger, nor even any debugging-specific commands or constructs. Syntax errors or outright typos in the script generate cryptic error messages that are often of no help in debugging a non-functional script.

Example 30-1. A buggy script

#!/bin/bash
# ex74.sh

# This is a buggy script.

a=37

if [$a -gt 27 ]
then
  echo $a
fi  

exit 0

Output from script:
./ex74.sh: [37: command not found
What's wrong with the above script (hint: after the if)?

Example 30-2. Missing keyword

#!/bin/bash
# missing-keyword.sh: What error message will this generate?

for a in 1 2 3
do
  echo "$a"
# done     # Required keyword 'done' commented out in line 7.

exit 0  

Output from script:
missing-keyword.sh: line 10: syntax error: unexpected end of file
	
Note that the error message does not necessarily reference the line in which the error occurs, but the line where the Bash interpreter finally becomes aware of the error.

Error messages may disregard comment lines in a script when reporting the line number of a syntax error.

What if the script executes, but does not work as expected? This is the all too familiar logic error.

Example 30-3. test24, another buggy script

#!/bin/bash

#  This is supposed to delete all filenames in current directory
#+ containing embedded spaces.
#  It doesn't work.  Why not?


badname=`ls | grep ' '`

# echo "$badname"

rm "$badname"

exit 0

Try to find out what's wrong with Example 30-3 by uncommenting the echo "$badname" line. Echo statements are useful for seeing whether what you expect is actually what you get.

In this particular case, rm "$badname" will not give the desired results because $badname should not be quoted. Placing it in quotes ensures that rm has only one argument (it will match only one filename). A partial fix is to remove to quotes from $badname and to reset $IFS to contain only a newline, IFS=$'\n'. However, there are simpler ways of going about it.
# Correct methods of deleting filenames containing spaces.
rm *\ *
rm *" "*
rm *' '*
# Thank you. S.C.

Summarizing the symptoms of a buggy script,

  1. It bombs with a "syntax error" message, or

  2. It runs, but does not work as expected (logic error).

  3. It runs, works as expected, but has nasty side effects (logic bomb).

Tools for debugging non-working scripts include

  1. echo statements at critical points in the script to trace the variables, and otherwise give a snapshot of what is going on.

  2. using the tee filter to check processes or data flows at critical points.

  3. setting option flags -n -v -x

    sh -n scriptname checks for syntax errors without actually running the script. This is the equivalent of inserting set -n or set -o noexec into the script. Note that certain types of syntax errors can slip past this check.

    sh -v scriptname echoes each command before executing it. This is the equivalent of inserting set -v or set -o verbose in the script.

    The -n and -v flags work well together. sh -nv scriptname gives a verbose syntax check.

    sh -x scriptname echoes the result each command, but in an abbreviated manner. This is the equivalent of inserting set -x or set -o xtrace in the script.

    Inserting set -u or set -o nounset in the script runs it, but gives an unbound variable error message at each attempt to use an undeclared variable.

  4. Using an "assert" function to test a variable or condition at critical points in a script. (This is an idea borrowed from C.)

  5. trapping at exit.

    The exit command in a script triggers a signal 0, terminating the process, that is, the script itself. [1] It is often useful to trap the exit, forcing a "printout" of variables, for example. The trap must be the first command in the script.

Trapping signals

trap

Specifies an action on receipt of a signal; also useful for debugging.

Note

A signal is simply a message sent to a process, either by the kernel or another process, telling it to take some specified action (usually to terminate). For example, hitting a Control-C, sends a user interrupt, an INT signal, to a running program.

trap '' 2
# Ignore interrupt 2 (Control-C), with no action specified. 

trap 'echo "Control-C disabled."' 2
# Message when Control-C pressed.

Example 30-5. Trapping at exit

#!/bin/bash

trap 'echo Variable Listing --- a = $a  b = $b' EXIT
# EXIT is the name of the signal generated upon exit from a script.

a=39

b=36

exit 0
# Note that commenting out the 'exit' command makes no difference,
# since the script exits in any case after running out of commands.

Example 30-6. Cleaning up after Control-C

#!/bin/bash
# logon.sh: A quick 'n dirty script to check whether you are on-line yet.


TRUE=1
LOGFILE=/var/log/messages
# Note that $LOGFILE must be readable (chmod 644 /var/log/messages).
TEMPFILE=temp.$$
# Create a "unique" temp file name, using process id of the script.
KEYWORD=address
# At logon, the line "remote IP address xxx.xxx.xxx.xxx"
#                     appended to /var/log/messages.
ONLINE=22
USER_INTERRUPT=13
CHECK_LINES=100
# How many lines in log file to check.

trap 'rm -f $TEMPFILE; exit $USER_INTERRUPT' TERM INT
# Cleans up the temp file if script interrupted by control-c.

echo

while [ $TRUE ]  #Endless loop.
do
  tail -$CHECK_LINES $LOGFILE> $TEMPFILE
  # Saves last 100 lines of system log file as temp file.
  # Necessary, since newer kernels generate many log messages at log on.
  search=`grep $KEYWORD $TEMPFILE`
  # Checks for presence of the "IP address" phrase,
  # indicating a successful logon.

  if [ ! -z "$search" ] # Quotes necessary because of possible spaces.
  then
     echo "On-line"
     rm -f $TEMPFILE    # Clean up temp file.
     exit $ONLINE
  else
     echo -n "."        # -n option to echo suppresses newline,
                        # so you get continuous rows of dots.
  fi

  sleep 1  
done  


# Note: if you change the KEYWORD variable to "Exit",
# this script can be used while on-line to check for an unexpected logoff.

# Exercise: Change the script, as per the above note,
#           and prettify it.

exit 0


# Nick Drage suggests an alternate method:

while true
  do ifconfig ppp0 | grep UP 1> /dev/null && echo "connected" && exit 0
  echo -n "."   # Prints dots (.....) until connected.
  sleep 2
done

# Problem: Hitting Control-C to terminate this process may be insufficient.
#          (Dots may keep on echoing.)
# Exercise: Fix this.



# Stephane Chazelas has yet another alternative:

CHECK_INTERVAL=1

while ! tail -1 "$LOGFILE" | grep -q "$KEYWORD"
do echo -n .
   sleep $CHECK_INTERVAL
done
echo "On-line"

# Exercise: Discuss the strengths and weaknesses
#           of each of these various approaches.

Note

The DEBUG argument to trap causes a specified action to execute after every command in a script. This permits tracing variables, for example.

Note

trap '' SIGNAL (two adjacent apostrophes) disables SIGNAL for the remainder of the script. trap SIGNAL restores the functioning of SIGNAL once more. This is useful to protect a critical portion of a script from an undesirable interrupt.

	trap '' 2  # Signal 2 is Control-C, now disabled.
	command
	command
	command
	trap 2     # Reenables Control-C
	

Notes

[1]

By convention, signal 0 is assigned to exit.